Found a killer deal on a 60-gallon air compressor - too good to be true?

Hey everyone, just stumbled on a local listing for a 60-gallon Craftsman air compressor for $200. Looks like it's from the early 2000s but supposedly runs fine. Seller says it holds pressure and the motor starts up. I've been wanting to upgrade from my little pancake compressor for bigger projects like sandblasting and running multiple tools. Should I jump on this or is it a money pit waiting to happen?

Whoa, $200 for a 60-gallon is insane if it's legit! I'd be all over that for my shop. But be careful man - check the tank for rust inside. Old compressors can have moisture issues that weaken the tank over time. Ask the seller if you can see it run and check the pressure gauge. Also, what's the CFM rating? If it's low, it might not keep up with sandblasting anyway. Still, at that price, even if you need to replace the motor or pump, you might come out ahead.

Ah, the old Craftsman Professional series! Those were workhorses. I've restored a few of those. At $200, you're basically paying for the tank and frame. Expect to replace seals, maybe the pressure switch, and definitely drain and inspect the tank thoroughly. If the motor is original, it might need new capacitors. But honestly, if you're handy, this could be a fantastic project. The parts are still available, and once restored, these things last forever. Just budget another $100-150 for parts.

Thanks guys! Seller says it's 11.5 CFM at 90 PSI, which seems decent? He's letting me test it tomorrow. DeWaltDan86 - good call on the rust check, I'll bring a flashlight to look inside the tank. CraftsmanChris760 - I don't mind putting some work into it if it's worth it long-term. My main worry is the tank being unsafe after 20+ years. If it passes the inspection, I think I'm gonna grab it. Will update after I check it out!

11.5 CFM is solid for most DIY stuff! That's actually better than some newer models in that price range. Just remember - if the tank has ANY significant rust or pitting, walk away. Safety first! But if it's clean, you're getting a steal. Even if you end up spending $300 total after parts, you're still way under what a new comparable unit costs. Good luck, hope it works out!