PSA: Don't be a dummy with your compressor like I was

Alright folks, quick safety share bc I almost learned the hard way. I was swapping out a quick coupler on my Husky 30 gal and forgot to bleed the tank COMPLETELY. Thought I had it drained but there was still like 20 psi left. When I loosened the fitting, that thing whipped around and put a dent in my workbench. Lucky it wasn’t my face. So reminder: double check your gauge, crack the drain valve, and wait. Any of y’all got close calls?

Good lookin' out, SocketSarah. I been runnin' compressors for 40 years and I still tap the gauge sometimes. One tip: after you drain, open the valve and stick a toothpick in to make sure no air’s hissin'. Old timer trick. Also, wear safety glasses every time—even for couplings.

Yeah, solid advice. I’ve seen guys pop fittings off and it’s no joke. I always use a whip hose with a blow gun to depressurize the line before disconnecting. Also, check your relief valve monthly. Had one seize on a job site once, tank built up to 175 psi before I noticed. Scary stuff.

Toothpick trick is genius, Bob! And Felix, good point on the relief valve—I admit I’ve never tested mine. Gonna add that to my monthly ritual. Better safe than sorry.

One more thing: don't use PVC for air lines. Seen too many explode. Use rubber or copper. Safety first, fellas.